How To Measure Your Hedge Trimmer Blades?

A well-maintained garden requires a well-maintained hedge trimmer, that is both reliable and efficient. 

One of the significant aspects of hedge trimmer maintenance is the measurement of its blades.

The size and length of the blades are directly responsible for cutting efficiency and the overall performance of your hedge trimmer. 

If you are a DIY enthusiast and like to maintain your own hedge trimmer at home, then knowing the exact measurements is crucial. 

In this article, I will be guiding you on how to measure your hedge trimmer blades with step-by-step instructions. I will also be sharing important insights about these measurements. 

So, without any further ado, let’s get right to it. 

Why Is It Important To Measure Hedge Trimmer Blades?

Before we get to the step-by-step guide, let’s first discuss why it is important to measure hedge trimmer blades. 

Measuring these blades is for DIY enthusiasts who want to take the performance of their tool to the next level and are creating their own blades manually. 

Hedge trimmer blades get wear and tear over time, and you often need to replace them if they get even a bit damaged. 

So, in simple words, there are two reasons why you need exact measurements of your hedge trimmer blades. 

The first is a very simple one. You want to purchase new blades, premade, from the local store and need to know the exact measurements. 

The second one is for those DIY enthusiasts who create and sharpen their own blades by cutting down the larger ones. They need the exact measurements to ensure that all the blades are exactly the same size and are perfectly aligned. 

Related: How To Maintain Hedge Trimmer Blades in 6 Simple Steps

Step-by-Step Guide to Measure Hedge Trimmer Blades

Here are the steps that you must follow to take accurate measurements of the blades.

Step 1: Gather the Necessary Equipment

You don’t need many tools for this purpose. Just a basic measuring tape, a straight edge, and some safety tools will get the job done. 

Make sure the measuring tape has visible points and is not too old with faded lines and digits. 

You can use a piece of wood or any other item for a straight edge. They are just to ensure that your blades are straight while you are measuring them. 

Safety tools are a must. The blades are sharp, so you must wear gloves to ensure that you don’t cut your hands. 

You will also need cleaning cloth to clean the blades before you start the measurement. 

Step 2: Prioritize Safety 

Before you begin with the process, you must ensure that the tool has no way of accidentally starting up. 

If you are using a corded-electric tool, make sure it is not plugged in. Simply turning the switch off is not enough, you must unplug the tool. 

If you are using a battery-powered hedge trimmer, remove the battery before you move ahead with the process. 

Step 3: Measuring Blade Length

Using a measuring tape, take the length of each blade from its tip to the base. This is to ensure two things. First, all the blades are of the same length, and second to know the exact measurements of the blades. 

Once you have taken all the measurements and ensured that they are consistent, you can move to the next step. 

Step 4: Measuring Overall Length

To double-check the blade length, you have to measure from the tip of one blade to the tip of another blade at the other end. This will help you ensure that your earlier measurements were correct. 

Also, measuring blades this way also ensures the overall consistency in their length. 

Step 5: Measuring Blade Gap

You must also measure the gap between hedge trimmer blades to ensure that it is consistent. 

If the gap between the blades is not consistent, the gap between the first and second blades is larger than the gap between the second and third blades, which means there is a misalignment. 

For correct alignment, all the blades must be equally apart from one another. 

Step 6: Selecting the Replacement Blades

Now based on your measurements, you can easily purchase the precise replacement blades for your hedge trimmer. 

You can go to a local store and purchase replacement blades that are exactly the same length down to the last centimeter. 

Related: Why Is My Hedge Trimmer Blade Not Moving

Tips for Ensuring Precise Measurement

To achieve the most accurate results when measuring these blades, you should consider the following points:

• Use a straight edge while taking the measurements. This will ensure precise alignment of the blades and remove any margin for error. You can use a piece of wood or any other object as a straight edge. 
• Always take multiple measurements to ensure consistency. You can take the blade length of each blade, of the overall blade, and cross-check for accuracy. 
• You should clean the blades before measuring them to ensure that the dirt or debris on the blades doesn’t interfere with your measurement process. 
• You must check the spacing between the blades to ensure that there is no misalignment. 
• Whenever you are unsure about any of the measurements, you must retake the blades to ensure accuracy. 

Can Blade Size Affect the Overall Performance of Hedge Trimmer?

If the replacement blades are not of the same size as the original blades, if the size of the blades is not consistent between themselves, or if there is a misalignment in the blades, it can reduce the overall performance and cutting efficiency. 

Hence, measuring the blades accurately has significant value when it comes to the performance of the hedge trimmer. 

You must measure the blade size accurately if you hope to retain the top-notch performance of your tool. 

The accurately sized blades, that are properly aligned ensure peak performance and efficiency that will make garden maintenance a breeze. 

Related: How To Grease Echo Hedge Trimmer in 7 Simple Steps

Frequently Asked Questions

What do I need to measure hedge trimmer blades?

You don’t need any special equipment or tools to measure the blades. You just need a good-quality measuring tape and safety gloves to protect your hands from any harm. Simply measure the blades multiple times to ensure consistency. 

Why is there a need to measure hedge trimmer blades?

Measuring hedge trimmer blades plays a significant role in the maintenance of your tool. If you need to replace the blades because of signs of wear or damage, then you will have to measure them accurately.

Can I measure hedge trimmer blades easily?

Yes, you can measure them yourself easily. There are several tricks to ensure consistency. You can take multiple measurements to ensure accuracy and also measure both sides of the blades.  

What if the blades are not properly aligned?

If the gaps between the blades are not consistent, it means that the blades are not properly aligned. You can use a straightedge when taking measurements to ensure that there is no misalignment in the blades. 

How to ensure accurate measurements while measuring hedge trimmer blades?

There are several ways to ensure accuracy. First, you must take multiple measurements. Then you must measure the whole blade from one tip to the other, to ensure all of the blades are of the same size. 

Wrapping Up!

To sum it all up, measuring the blade size plays a significant role in the maintenance of your hedge trimmer. 

The above guide provides you with detailed steps that will help you measure the blades of a hedge trimmer accurately. 

I have shared several tips and tricks to ensure accuracy and precision in the measurement. 

If you are still confused or have any questions, you can drop them in the comments section below and I will get back to you as soon as I can. Good Luck!