How To Remove Battery From Your Ryobi Hedge Trimmer?

Your hedge trimmer is your brother-in-arms when it comes to garden maintenance, and you ought to know everything there is to know about it. 

One thing users often struggle with is removing and reinstalling the battery from a battery-powered hedge trimmer. 

You might think what’s so special about removing and re-installing a battery pack? It would just come off and go back in, right?

Well, it is not as simple as that. There is a specific trick to swiftly remove and properly reinstall a battery pack on a hedge trimmer. 

If you have a Ryobi hedge trimmer, then you might have already struggled with the process. 

As a proud owner of a Ryobi hedge trimmer myself, I am familiar with all the tricks one can use to remove and reinstall the battery. 

So, in this article, I will be sharing deep insights about battery removal including why it is important to remove the battery and how you can do so with minimum effort. 

So, without any further ado, let’s get right to it. 

Why Is It Important To Remove Battery From Ryobi Hedge Trimmer?

Owning a battery-powered hedge trimmer is a true privilege. They have the least maintenance needs and are quite easy to use and operate. 

However, you will have to remove the battery and reinstall it several times, not just with the Ryobi hedge trimmer but with any battery-powered hedge trimmer. 

Now, you might be thinking, why do I need to remove the battery at all? Can’t I just leave it on?

In short, no. There are several reasons you will have to remove the battery from your tool on a regular basis. 

The first is charging. You cannot charge the battery packs while they are still installed on your tool. So, you will have to remove them for charging. 

Secondly, when storing your hedge trimmer, you will have to remove the battery to properly store the tool. 

Lastly, you also need to remove the battery pack when you are doing maintenance of your tool, for safety reasons obviously. 

Also Read: How To Remove Battery From Hedge Trimmer

What Happens If I Don’t Remove Battery From My Hedge Trimmer?

Well, you will have to remove it for charging. There is no alternative to that, but you might think about not going through the hassle of removing it for maintenance or storage. 

Don’t even think about it, because it can be potentially dangerous not only to your tool but also to yourself.

If you don’t remove the battery pack before storing your tool, the battery will fall victim to over-discharge and will have a reduced lifespan. 

If you don’t remove it during maintenance, then there is a risk of accidental startup which can be hazardous and can cause serious injuries, especially when you are working on the blades. 

Hence, to ensure the prolonged service life of the battery pack and your utmost safety, you must learn how to remove the battery from your Ryobi hedge trimmer.

Related: How To Maintain Hedge Trimmer

Understanding The Battery Installation and Removal Mechanism

The only reason you might have thought of not removing the battery is because you think it is a hassle, or the process is a bit difficult or tricky. 

But that is not the case. Once you understand the mechanism that holds the battery in place or releases it, you will know that removing and reinstalling the battery is a swift process that can be done in a fraction of a second, once you are used to it. 

So, you must understand the mechanism, which I will explain in the steps below, to learn how you can quickly and easily remove and reinstall the battery pack. 

Step-by-Step Guide To Remove Battery From Your Ryobi Hedge Trimmer

Here are the steps that can help you remove the battery from your tool:

• The Ryobi hedge trimmer comes in a unique and innovative design that lets you rotate the handle that is attached to the battery pack. 
• From the backside, look at the installed battery pack. You will notice that there is a trigger, a wide white button that you can press. 
• It’s not a touch mechanism, so you will have to put some force on it. The button has a spring inside it. 
• Once you press the button, the mechanism that was holding the battery in place will be released. 
• Now you can remove the battery from the tool. However, you will have to do one more trick. 
• You have to pull the battery straight to the back of the handle. Do not try to pull it off in the vertical direction. 
• The battery is removed by sliding it in the backward direction until it completely comes out. 
• The mechanism is a bit tricky, and even after you press the button, it can lock back into place. 
• So, you have to press the button and then pull the battery by sliding it backward to remove it swiftly. 
• That’s all you have to do. 

Once you have removed the battery, you will be able to analyze the mechanism that was holding it in place, and you will be able to understand it better now.

Related: How To Measure Your Hedge Trimmer Blades?

How To Reinstall the Battery on Ryobi Hedge Trimmer?

Reinstalling the battery is a bit simpler than removing it, as now you don’t have to press any button or release any mechanisms. 

Simply slide the battery inwards just the way you removed it. You will notice a sleeve that the battery can go inside and slide inwards. 

Make sure that both edges of the battery are inside the sleeve before you start sliding it inwards. 

You also have to ensure that the button or trigger is kept at the back and that you press the opposite side inwards. 

If it is not going inside smoothly, then you either haven’t placed it in the right direction or it isn’t inside the sleeve.

Don’t put too much force into it or you might end up damaging either the tool or the battery. 

Once the battery starts sliding, you have to keep pushing until you hear a clicking sound. That means that the battery is mounted or installed back in place. 

You can check by pulling it softly without pressing the button. Once you have ensured that it is properly installed, give your hedge trimmer a test run.

Make sure that you are holding the hedge trimmer properly and in a safe place before you give it a test run. 

What To Do If You Damage The Battery or Tool Handle?

Ryobi hedge trimmers are made of plastic, hard plastic but still plastic. So, if you are not careful and try to force the battery pack while installing or removing it, you might damage it. 

If you have damaged the battery or the tool, you will have to take it to a professional to check out if there are any chances of repair. 

Don’t try to tape the battery to the tool once the damage is done, because that will only put you at more risk and might cause a serious accident. 

Related: How To Remove Scabbard From Ryobi Hedge Trimmer

Frequently Asked Questions

Can I just pull the battery off from the hedge trimmer?

No, you should never try to do that. There is a proper mechanism to hold the battery in place and you must remove it by pressing the trigger. If you try to pull it off forcibly, then you might damage it. 

Is it difficult to remove the battery from a Ryobi hedge trimmer?

No, it is not difficult at all. You can remove the battery easily once you learn how to do so. By reading the step-by-step guide I have shared in this article, you will be able to swiftly remove and reinstall the battery. 

Can I store the hedge trimmer without removing the battery?

Yes, you can but it is not advised. Storing the tool with the battery still installed will reduce the service life of the battery and can cause over-discharge. So, the tool might start losing performance and efficiency after a while. 

Can I charge the hedge trimmer without removing the battery?

It is not possible to charge the battery pack when it is still mounted on the tool. So, you will have to remove the battery pack and then put it into the charger to get it charged. Hence, you must know how to remove the battery pack properly. 

Can I do maintenance and cleaning of the hedge trimmer without removing the battery?

You should never do maintenance when the battery is still mounted on the tool. It is not safe and can be potentially hazardous. The tool might start accidentally while you are cleaning or sharpening the blades, and you might injure yourself or someone else. 

Wrapping Up!

To sum it all up, removing the battery from your hedge trimmer is a crucial part of its maintenance and storage. So, you must know how to remove and reinstall the battery properly. 

Removing the battery from the Ryobi hedge trimmer can seem a bit tricky at first, but the process is simple and once you get the hang of it, you will be able to do it swiftly. 

Always remember to remove the battery when storing your tool or during its maintenance for reasons we have discussed in detail in the above article. 

I hope now that you know and understand the mechanism, you can do it easily and quickly. 

Still, got questions? Drop them in the comments section below and I will get back to you as soon as I can.